Dmx Usb Pro Driver For Mac

Windows, Mac and Linux Industry Standard USB 2.0 Support on Windows PC and Mac OSX, and popular linux flavors. Thanks to FTDI drivers, which enable the usb communication between your computer and DMX USB PRO, it will work on most of the computers. Even Raspberry Pi is now supported, for the hobbyists within you. For the open dmx usb there is no driver on the enttec website, they only offer a driver for PC, I am not sure if enttec dmx usb pro mac works on Mac. Je confirme que la dmxusbpro enttec ne fonctionne pas avec elcapitan et b47 Du coup la b48 a l’air bien FTDI 0 0xcd0e 0x 0x com.

  1. Dmx Usb Pro Driver For Mac 10 10 5
  2. Enttec Dmx Usb Pro Software

Art-Net, sACN/E1.31 and DMX512 are the most commonly used lighting control protocols with roots in simple theatrical light dimming. These days almost any lighting or stage effect equipment may be controlled using these protocols including moving lights, LED screens, fog machines and laser displays.

DMXking USB DMX and eDMX hardware is designed for use with computer based show control software. It replaces an entire lighting console allowing the user to perform sophisticated shows with little more than a laptop. There are many free and commercial software packages available and by selecting Art-Net or sACN as your DMX device compatibility is guaranteed even with high end lighting consoles. For USB DMX applications our compatibility with the Enttec Pro protocol assures compatibility in almost every situation.

We've made a list of pacakges and also highlight several popular ones with additional information about setup and configuration.

dmxusbpro - DMX 512 external for Max

WARNING: The dmxusbpro external is 'end of life' and should not be used for new projects! It was originally developed for Max4.5 and never updated ever since.

  • Hey guys, I am a Mac OS X user, and I am wanting to control my lighting rig from my MacBook Pro. I have an Enttec OpenDMX USB dongle but I cannot seem to get it to run with MagicQ on my Mac, however on my girlfriends Windows laptop, it runs fine without a hitch.
  • May 11, 2018 The Martin USB Duo DMX Interface features XLR 5P female connectors and provides two DMX 512 universes from any USB enabled Windows-based PC. It communicates with Martin LightJockey™ (with Martin One-Key™), the Maxxyz™ and M1™ controller series, the Maxedia™ media server series, and Martin ShowDesigner 5™ (MSD5), as well as Martin fixture software uploaders (not compatible with MUM.
  • Looking for a low cost USB DMX 'cable' that'll go the distance and produce reliable DMX512 data output? The ultraDMX Micro is exactly what you've been looking for with an internal micro controller and tough XLR housing plus Enttec Pro compatibility there are few boxes this interface doesn't tick.

The dmxusbpro external for Max gives access to the Enttec DMX USB Pro interface and allows to send or receive DMX 512 data. Thus its possible to use Max as lighting controller for theatre or interactive installations.

dmxusbpro features (version 1.5):

  • send or receive up to 512 channels of DMX data
  • user setable refresh rate
  • user setable start-code
  • user setable break and mark-after-break time
  • update the firmware of the interface
  • query available serial ports to find connected interfaces
  • query device's serial number

More information about the features and how to use this external can be found in the dmxusbpro manual (203 kBytes ).

Dmx Usb Pro Driver For MacEnttec dmx usb pro driver mac


The dmxusbpro external works with the 'USB DMX Pro' interface only! It also works with the 'DMX USB Pro Mk2' but will not support any of it's new features. There are no plans to add support for the new features of the Mk2 interface.
The 'Open DMX USB' interface is not supported by this external.

To run the Max version of the dmxusbpro external Max 4.5 or later on Mac OS X or Windows is required. Mac OS 9 and older versions of Max are not supported. A Univeral Binary for Intel Macs running Max 4.6 is available. There is a new version for Max5. However, the older versions also work in Max5.
Some people have reported it works in Max6 as well, others says it doesn't work in Max6. The same goes for Max7 and 8 (some report it works, others say it reboots their machine or fails to find the device, but usually people don't say which operating system this is on). Try the DEMO below to find out who is right. - And keep in mind there are no plans to update this external to 'work' with Max6, 7 or 8.

To make sure the external works for you please try the DEMO version before you buy! It offers the full functionality, but is limited to transmit and receive a maximum of two channels (channels 1 and 2, to be precise).

  • dmxusbpro 1.5 DEMO for Max6.1 on OS X
  • dmxusbpro 1.4.1 DEMO for Max5 on OS X
  • dmxusbpro 1.5 DEMO for Max6.1 (64bit) on Windows
  • dmxusbpro 1.4.1 DEMO for Max5/6 (32bit) on Windows

In order to use this external you need to install the VCP driver from the FTDI website. It will not work with the D2XX driver that is used with Enttec's PRO-Manager!

User Feedback:

'Wow...this object smokes! I was previously using a [brand removed] model with another custom object to run a 508 channel light show. The dmxusbpro with your object is far faster and far more reliable.'

'I just wanted to tell you that the external is amazing and works fine in Max5. It's the best 10euros I've ever payed.'


dmxusbpro is available in a single user Non-Commercial License for non-commercial use. This license allows you to use the object for original software and artwork you wish to sell. For commercial use contact me and we can probably sort out a deal.


By purchasing a 1.x License you are allowed to use any upcoming 1.x release without having to pay for an upgrade.

dmxusbpro can only be purchased online. Payment is made through PayPal. After purchase I will send you your account information via email. That will enable you to access the dmxusbpro download area and freely download the package(s) you need.
If you already have a user account you might want to proceed to the dmxusbpro download area.

Dmx Usb Pro Driver For Mac 10 10 5

By placing an order you agree to the non-commercial license agreement.

Enttec Dmx Usb Pro Software

Note: When your order arrived you will be sent the access data to download dmxusbpro via email. The email is sent out automatically to your email address associated with your PayPal account. If you don't get a response within a reasonable time check your spam filters and contact me providing an alternative email address or a telephone number.