Fransgard Ti 6000 Parts Manual

See detailed specifications and technical data for Fransgard TI 6000 FL manufactured in 2005 - 2014. Get more in-depth insight with Fransgard TI 6000 FL specifications on LECTURA Specs. New owner’s manual are available from your Dealer or the factory phone + 45 98 63 21 22 (North America: 514 654 6126). If the warning decals become illegible, new decals can also be ordered. Tractor cannot be st 3) Keep hands, feet and clothing away from power driven parts! Do not make any modifications. All prices subject to VAT. Ben Burgess RTK Clue - bringing you +/- 2cm accuracy in the field. Contact Carl Pitelen on 51. NM JCB 530-70 - 2002 7165 hrs - £19,000.

Warn Winches are known for being rugged products that don’t suffer many defects like other models. However, like all products they can have problems from time to time. Here are some common problems that you might run into.

Fransgard winch

All equipment can fail and Warn winches are no exception. Here is a list of common problems you may come across.

Bad Contractors
One of the most common problems with all winches including Warn winches is that the contractor can often go bad. The contractor is a small black box that holds the relay switches that controls when power is sent to winch. You can normally find it on the backside of the winch with either wires or terminals on it. Warn is known for sealing this contractor to stop water from getting into it. However, Warn did recall several older models due to faulty contractors that could have caused fires.

Normally what users find is that the contractor will start to fail over time due to mud and other debris getting into the contractor or corroding the terminals.

Manual

Spooling Issues
Several owners have reported problems when spooling the cable for the Warn winch back into place. Some of them say that it doesn’t wind up easily and won’t free spool without forcing the turn switch on. Also, many people don’t care for the type of cable it uses.

While this experience isn’t the same for everyone, the advice seems to be the same – replace the cable type. Many users have switched to synthetic rope line instead. The synthetic rope is high-tech, lightweight, easy-to-handle alternative to steel rope. It tends to be easier to wind and a better product to winch with.

Dead Remote
A non-working Warn Winch could just be a dead remote control. Some users have found that the remote controlcan stop working. While Warn seems to be good at sending replacements quickly, keep in mind this problem in mind if you are troubleshooting a dead Warn winch.

ManualFransgard Ti 6000 Parts Manual

Fransgard Ti 6000 Parts Manual Free

Motor Quits Working
Often people have found that their Warn Winch motor quits working. This is probably due to a variety of issues including dirt/grime getting into the motor casing, a bad ground contact or the motor gears getting stuck. The solutions are fairly easy and basic. First, take a hammer and tap the housing to see if you can free up the motor gears. Next, check the ground contact to make sure you have a solid ground. Lastly, take the winch apart and give it a good cleaning.Chances are, one of these things will get your Warn Winch up and running again.

Fransgard Ti 6000 Parts Manual Diagram

Frayed Rope
At times your Warn Winch can have a frayed rope from use – either steel or synthetic. This is really due to usage more than anything else, however, there are times that the rope can spool to close to the housing causing it to rub the metal framework. Keep an eye on this since a frayed rope can lead to snapped cable. One of the ideas to combat this problem is to make sure you bring some sort of wrap when wrapping the cable around a sharp object. One handy idea is to slice open a garden hose and use that a protecting barrier.

Keeping an eye out for these potential problems can be the difference between being unstuck to walking back to town.

Fransgard Ti 6000 Parts Manual Transfer Switch

Related Posts: