In this video, I remove my Keystone Cougar fifth-wheel trailers original 10-year-old and badly worn Dometic 9100 power awning vinyl material. I replace it with a new Solera universal fit replacement from Lippert Components.
Disclaimer: Love Your RV! received this LCI product sample free of charge for the install.
All parts Letter Description with a link to the Lippert Store can be purchased. Page 4: Installation Solera Slider ® Installation and Owner’s Manual (For Aftermarket Applications) Installation Assemble the Extension Rod and Cap MUST All screws supporting the awning assembly have a backer within the structure of the wall of the unit.
Is your awning arm loose not able to stay in position? Lippert 344391 RV Solera Manual Awning Pull Rod Black 5.0 out of 5 stars 1. Solera Plain Head Power Hardware Kit for Pitched Awnings (66-1/8' Arms) Black $646.90. Compare with similar items. This item Lippert Components 351828 Solera White Flat Awning Manual Hardware Kit. Solera® Power Awning. Operating the Solera® Power Awning in any other manner than described may result in personal injury, damage to the recreational vehicle or the awning assembly as well as voiding the Lippert Components Limited Warranty. Page 4: Operation operation Note: Note: Some coaches may not use the LCI switch (Fig. Solera® Power Awning Manual Override Comparative Benefits Connect with LCI: Company. Locations About Investors Culture News Room Careers & Engagement Social.
Video Detailing the New Solera Awning Fabric Installation
Rather than removing the complete awning hardware, including the support arms, I decided to just take off the roller tube. To do that, I first unrolled the awning about a foot or so and put a cotter pin in the torsion spring to keep it from unwinding violently. Then I restrained the spring-loaded support arms with zip ties.
DANGER! Failing to properly restrain the support arms and roller tube torsion spring can result in injury or death. These items are spring-loaded. Read the manuals for your particular awning make and model and follow the recommended disassembly procedures.
Next, I cut away the old awning material and removed the two bolts holding the roller tube to the support arms. Once on the ground, I was able to easily replace the old material with the new Solera awning fabric. To do this, I needed to unwind the torsion spring with a pair of vise-grips and drill out the rivets holding the end caps.
Once the new material was rolled on the awning tube, I riveted the end caps back in place and rewound the torsion spring, restaining it once again with the cotter pin.
Finally, with the help of a couple of RVing friends, we carefully guided the new awning material back into the awning top rail channel on the RV sidewall. To protect the thin vinyl material from any damage, I used some pool noodles and tape on any sharp hardware edges. I also sprayed silicone lube into the channel to make sliding in the end cord bead easier. We utilized a pair of ladders and my truck’s 8-foot bed as make-do scaffolding slowly moving it along.
After a few minor set screw adjustments to make sure the awning material was centered on the roller tube and the RV sidewall channel, it was ready to use. Everything went relatively smoothly, and I’m happy with the new Solera vinyl awning.
Tools & Supplies Used:
Related Posts and Videos:
The Thule Crown is a wall-mounted manual awning made by Swedish manufacturer, Thule. Available in seven different lengths, from 6.2 feet to 14.8 feet with a maximum projection of 8.2 feet. The Thule Crown features optional, easy-to-deploy vertical support arms for added stability.
- 8-inch projection
- Quick release aluminum support legs
- Available in multiple sizes, lengths ranging from 6.2 feet to 14.8 feet with a maximum projection of 8.2 feet
- Optional, easy-to-deploy vertical support arms provide added stability
- Contemporary awning design
- Lightweight and sturdy